Install Operation (Installing Additional Channel Adapters) - HP StorageWorks XP20000/XP24000 - Disk Array Reference Manual

+{CHA,Kind}={CHA-2WU, 8M
++{Port,HTP/FNP,CU Number,Emulation}=[{AN,HTP,00:00-00:3F,H-6591-2},
{CN,HTP,00:00-00:3F,H-6591-2},
{EN,HTP,00:00-00:3F,H-6591-2},{GN,HTP,00:00-00:3F,H-6591-2}],Num. of Ports=4
+Num. of CHAs=4
[Install]
Install function
Install
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in
Table 121 Install Operation (Installing Additional Channel Adapters)
Item Description
Channel Adapter
The channel adapter (CHA) mounting location.
(CHA)
Kind The kind of PCB mounted.
Port The mounting location of the port.
The speed mode of the Fibre PCB is indicated for open systems.
Fibre PCB Mode
<Standard>: Standard mode. <High Speed/MIX>: High speed mode/Mix mode.
Initiator/Target The type of Initiator or Target.
The channel speed is indicated for open systems.
Channel Speed
1: 1 Gbps, 2: 2 Gbps, 4: 4 Gbps, 8: 8 Gbps, Auto: Auto mode.
CU Number Indicates the range of the CU number which the port belongs.
Num of Ports The number of ports.
HTP/FNP The HTP or FNP is indicated for FICON.
LCP The LCP is indicated for ESCON.
Emulation The emulation type is indicated for mainframe systems.
Num. of Channel
The number of Channel Adapters (CHA).
Adapters (CHA)
Example 2 (installing additional subsystems, ECC Groups or LDEVs)
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Install],Install,,Normal end,,,Seq.=xxxxx
+{DKA,Kind,Transfer Rate}=[{DKA-1AL,DKF 4MP,4},{DKA-1BL,DKF 4MP,4},{DKA-2ML,DKF 4MP,4},
MFibre 4ch-4mp},
XP24000/XP20000 Audit Log User and Reference Guide
Table 121.
161