Detailed information displays for this operation, as shown in
Table 184 Set FCSP Port Switch Operation
Item
Port
Switch
DH Group
Auth
UserName
Num. of Ports
Set Fibre-Channel Security Protocol (FCSP) Target Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[LUNM],Set FCSP Target,,Normal end,,,Seq.=xxxxx
+{Port,HostGrpID,Switch,DH Group,UserName}=[{1E,0x01,Enable,0,1111111111111111},
{3E,0x01,Disable,0,2222222222222222}],Num. of Grps=2
[LUNM]
LUN Manager function
Set FCSP Target
Set FCSP Target operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in
Table 185 Set FCSP Target Operation
Item
Port
HostGrpID
Switch
Description
The name of the port where authentication parameter has been set.
The setting status whether to execute authentication by port.
Disable: Do not authenticate, Enable: Authenticate
Not used. (fixed to 0)
The setting status of authentication method.
bi-directional: bi-directional authentication, unidirectional: unidirectional authentication
The user name of the port.
The number of ports where authentication parameter has been set.
Description
The name of the port which includes the host group where authentication parameter has
been set.
The number of the host group where authentication has been set.
The setting status whether to execute authentication by host group.
Disable: Do not authenticate, Enable: Authenticate
XP24000/XP20000 Audit Log User and Reference Guide
Table
184.
Table
185.
211