Set Speed Mode operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in
Table 152 Set Speed Mode Operation
Item
Channel Adapter
(CHA)
Port Block
Mode
Num. of Blocks
Num. of Channel
Adapters (CHA)
Set Subsystem Time Operation
Example 1 (The case of TOD Change)
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Install],Set Subsystem Time,TOD Change,
Normal end,,,Seq.=xxxxx
+Time=YYYY/MM/DD HH:mm:SS
Example 2 (The case of Synchro. Infor.)
For IPv4
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Install],Set Subsystem Time,Synchro. Infor.,
Normal end,,,Seq.=xxxxx
+{Use Synchro.,SNTP IP,SNTP Port,Time Zone,Check Time}={Valid,(123.456.789.123),100,
Tokyo Standard Time,24}
For IPv6
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Install],Set Subsystem Time,Synchro. Infor.,
Normal end,,,Seq.=xxxxx
+{Use Synchro.,SNTP IP,SNTP Port,Time Zone,Check Time}
={Valid,(1111.1111.1111.1111.AAAA.AAAA.AAAA.AAAA),100,
Tokyo Standard Time,24}
[Install]
Install function
Description
The Channel Adapter (CHA) name (name of channel adapter).
The port block. Port blocks A and B are output.
The mode set to the port.
Standard: Standard mode. High Speed/MIX: High speed mode/Mix mode.
The number of port blocks in the channel adapter.
The number of channel adapters that the mode is changed.
XP24000/XP20000 Audit Log User and Reference Guide
Table
152.
185