Install Operation - HP XP20000/XP24000 Reference Manual

Install Operation

Example 1 (installing additional channel adapters)
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Install],Install,,Normal end,,,Seq.=xxxxx
+{CHA,Kind}={CHA-1LU,16FS Fibre
++{Port,Fibre PCB Mode,Initiator/Target,Channel Speed,CU Number}
=[{9J,Standard,Target,Auto,00:00-00:FE},{BJ,Standard,Target,Auto,00:00-00:FE},
-{DJ,Standard,Target,Auto,00:00-00:FE},{FJ,Standard,Target,Auto,00:00-00:FE},
{9K,Standard,Target,Auto,00:00-00:FE},{BK,Standard,Target,Auto,00:00-00:FE},
-{DK,Standard,Target,Auto,00:00-00:FE},{FK,Standard,Target,Auto,00:00-00:FE}],
Num. of Ports=8
+{CHA,Kind}={CHA-1KU, 8M
++{Port,HTP/FNP,CU,Number,Emulation}=[{9N,HTP,00:00-00:3F,H-6591-2},
{BN,HTP,00:00-00:3F,H-6591-2},{DN,HTP,00:00-00:3F,H-6591-2},{FN,HTP,00:00-00:3F,
H-6591-2}],
Num. of Ports=4
+{CHA,Kind}={CHA-2XU,16FS Fibre
++{Port,Fibre PCB Mode,Initiator/Target,Channel Speed,CU Number}
=[{AJ,Standard,Target,Auto,00:00-00:FE},{CJ,Standard,Target,Auto,00:00-00:FE},
-{EJ,Standard,Target,Auto,00:00-00:FE},{GJ,Standard,Target,Auto,00:00-00:FE},
{AK,Standard,Target,Auto,00:00-00:FE},{CK,Standard,Target,Auto,00:00-00:FE},
-{EK,Standard,Target,Auto,00:00-00:FE},{GK,Standard,Target,Auto,00:00-00:FE}],
Num. of Ports=8
+{CHA,Kind}={CHA-2WU, 8M
++{Port,HTP/FNP,CU Number,Emulation}=[{AN,HTP,00:00-00:3F,H-6591-2},
{CN,HTP,00:00-00:3F,H-6591-2},
{EN,HTP,00:00-00:3F,H-6591-2},{GN,HTP,00:00-00:3F,H-6591-2}],Num. of Ports=4
+Num. of CHAs=4
[Install]
Install function
Install
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in
Table 122 Install Operation (Installing Additional Channel Adapters)
Item
CHA
Kind
Port
Fibre PCB Mode
Initiator/Target
Channel Speed
CU Number
Num of Ports
HTP/FNP
LCP
Emulation
Num. of CHAs
Example 2 (installing additional subsystems, ECC Groups or LDEVs)
120 Install Function
8ch-4mp},
MFibre 4ch-4mp},
8ch-4mp},
MFibre 4ch-4mp},
Description
The CHA) mounting location.
The kind of PCB mounted.
The mounting location of the port.
The speed mode of the Fibre PCB is indicated for open systems.
<Standard>: Standard mode. <High Speed/MIX>: High speed mode/Mix mode.
The type of Initiator or Target.
The channel speed is indicated for open systems.
1: 1 Gbps, 2: 2 Gbps, 4: 4 Gbps, 8: 8 Gbps, Auto: Auto mode.
Indicates the range of the CU number which the port belongs.
The number of ports.
The HTP or FNP is indicated for FICON.
The LCP is indicated for ESCON.
The emulation type is indicated for mainframe systems.
The number of CHAs.
Table 122 (page 120).