Add Pair Operation - HP StorageWorks XP20000/XP24000 - Disk Array Reference Manual

Item
Timer Type

Add Pair Operation

user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00, [TC],Add Pair,,Normal end,,,Seq.=xxxxxx
+{M-VOL(LDKC:CU:LDEV),R-VOL(LDEV),S/N,LDKC,SSID,ControllerID,Type, Initial Copy,
Fence Level,Copy Pace, Priority,Diff,CFW,DFW,TS, CTG, Error Level,Result}=
-{0x00:0x00:0x00,0xFF,99999,0x00,0x0004,4,Async,Entire,Never,15,032,Auto,
Only M-VOL,-,-,0x00,Group,Normal End},
(snip)
-(snip), Num.of Pairs=xx
[TC]
TrueCopy for Mainframe function (for IBM z/OS)
Add Pair

Add Pair operation

Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in
Table 253 Add Pair Operation
Item
M-VOL
(LDKC:CU:LDEV)
R-VOL (LDEV)
S/N
LDKC
SSID
Controller ID
Type
Initial Copy
Fence Level
280 TrueCopy (TC) for Mainframe Function
Description
The timer type set.
System: System timer, Local: Local timer, None: No timer (system timer)
Description
The LDKC, CU, and LDEV numbers of the volume specified to the main volume when
the pair is created
The LDEV number of the volume specified to the remote volume when the pair is created
The serial number of the device
The LDKC number of the paired LDKC
Indicates SSID
The controller ID.
The update copy mode set; Sync: Synchronous mode, Async: Asynchronous mode
The initial copy mode set; Entire: Copy all, None: Do not copy
The fence level set (the condition that MCU rejects the write operation to the main
volume)
Never: No condition, Data: S-VOL data, Status: S-VOL status
Table 253.