Set Plan Condition Operation - HP StorageWorks XP20000/XP24000 - Disk Array Reference Manual

Item
TargetLDEV
OwnerID
Result
Num. of LDEVs

Set Plan Condition Operation

user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Auto LUN], Set Plan Condition,,Normal end,,,
Seq.=xxxxx
+{SetType,StartTime,TimeRequiredMax(min.),AvailablityMax(%),VolumeMax} =
[{Default,24:00,120,100,65535}] Num. of Data = 1
[Auto LUN]
HP XP Auto LUN Software function
Set Plan Condition

Set Plan Condition operation

Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in
Table 294 Set Plan Condition Operation
Item
SetType
StartTime
318 XP Auto LUN Software Function
Description
The logical volume ID of the migration target. The number on the left of the colon is an
LDKC number, the number between the colons is a CU number and the number on the
right of the colon is an LDEV number. This value is output only when the manual migration
plan is set.
The program which set this migration plan; for HP XP Auto LUN Software, 0x00 is output.
For a program other than HP XP Auto LUN Software, the ID of the program product is
output.
The result of operation.
Normal end: Normal end, Error(xxxx-yyyyy): Abnormal end, Not Execute: Not executed
xxxx: Part code, yyyyy: Error code
The number of manual migration plans set and deleted.
Description
The executed operation.
Default: The default auto migration plan is applied (click the Default button, and then
click the Set button).
Customize: The customized auto migration plan is applied (click the Set button after
changing the value of the auto migration plan parameter).
The specified start time of the auto migration, that is, the time when the auto migration
plan execution starts.
Table 294.