Change Pair Option Operation - HP StorageWorks XP20000/XP24000 - Disk Array Reference Manual

Item
Path Blockade
Watch(s)
Path Blockade SIM
Watch(s)
Service SIM
Parallel Initial Copy
(CU)
LDKC
CU
Service SIM
PPRC Support
SCP Time(s)
Parallel Initial Copy
(CU)
Num. of CUs

Change Pair Option Operation

user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Cnt Ac],Change Pair Option,,Normal end,,,Seq.=xxxxxx
+{P-VOL(Port-G-ID-LUN),Fence Level, Error Level,Result}=
-{1A-0x00-0x000,Never,Group,Normal End},{1A-0x00-0x001,Never,Group,Normal End},
{1A-0x00-0x002,Never,Group,Normal End},(snip)
-(snip), Num. of Pairs=xx
[Cnt Ac]
HP XP Continuous Access Software function
Change Pair Option
Change Pair Option operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
94 XP Continuous Access Software Function
Description
The path blockade watch period set. The unit is second.
The path blockade SIM watch period set. The unit is second.
Indicates whether the remote copy related SIM is reported or not.
Report, Not Report
Indicates whether the parallel operation of initial copy by CU is enabled or not.
Enable, Disable
The LDKC number.
The CU number of the connected CU.
Indicates whether to report the remote copy-related SIM.
Report, Not Report
Indicates whether the host supports PPRC.
Yes: support, No: not support
The SCP delay time when the pair is suspended. The unit is second.
The number of parallel operation of initial copy by CU. (1 to 16)
The number of CUs set.