Parameters For Set Ip Address Operation; Set Ip Address Operation - HP StorageWorks XP20000/XP24000 - Disk Array Reference Manual

Install function
Set IP Address

Set IP Address operation

SVP&DKC
SVP&DKC is the selected parameter. This operation uses the following parameters, as shown in
149.
Table 149 Parameters for Set IP Address Operation
Parameter Description
SVP Change of the IP address for SVP
SVP&DKC Change of the IP address for SVP and DKC
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in
Table 150 Set IP Address Operation
Item Description
IP Add The IP address in SVP.
Subnet The subnet mask in SVP.
Indicates whether the Duplex setting in SVP is valid or invalid.
Use Duplex
Valid: Valid, Invalid: Invalid
The kind of duplicated SVP.
SVP Kind
Master SVP: Master SVP, Standby SVP: Standby SVP.
The status of IPv4.
IPv4
Valid: enabled, Invalid: disabled.
The subnet mask of IPv6.
IPv6
Valid: enabled, Invalid: disabled.
M-SVP
Master SVP details are provided in the format described below.
IPv4 (IP Address,
Subnet Mask) IPv4 (IP Address: IP address, Subnet Mask: Subnet Mask)
IPv6 (IP Address, IPv6 (IP Address: IP Address, Subnet Prefix: Subnet Prefix)
Subnet Prefix)
XP24000/XP20000 Audit Log User and Reference Guide
Table 150.
Table
183