Deletevolume(Fibre) Operation - HP StorageWorks XP20000/XP24000 - Disk Array Reference Manual

Item
Num. of Groups

DeleteVolume(FIBRE) Operation

user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Ext Stor],DeleteVolume(FIBRE),,Normal end,,,Seq.=xxxxx
+{ExGroup,Mode,Result}=[{E1-1,Force,Normal end},{E1-2,Force,Normal end},
{E1-3,Normal,Normal end}],Num. of Volumes=3
[Ext Stor]
HP XP External Storage Software function
DeleteVolume(FIBRE)
DeleteVolume(FIBRE) operation (delete volume)
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in
Table 90 DeleteVolume(FIBRE) Operation
Item
ExGroup
Mode
Result
Num. of Volumes
NOTE:
This log information indicates the completion of the Disconnect-Paths operation and does not indicate
the completion of Disconnect-Paths processing. Disconnect-Paths processing requires some time. The
status of the path changes after the completion of Disconnect-Paths processing.
Description
The number of external volumes resumed.
Description
The number of the external volume group and the reference number assigned to the
external volume of the external volume that the mapping has been released. The number
on the left of a dash (-) is the external volume number and the number on the right of the
dash (-) is the reference number of the group.
The mode of execution when mapping was released.
Normal: normal execution. Force: forcible execution
The result of operation.
Normal end: Normal end, Error(xxxx-yyyyy): Abnormal end
xxxx: Part code, yyyyy: Error code
The number of volumes in the external volumes that mapping has been released.
XP24000/XP20000 Audit Log User and Reference Guide
Table 90.
135