Procedure 5 Connector Check And Replacement Check - Toshiba TECRA S1 Maintenance Manual

2 Troubleshooting

Procedure 5 Connector Check and Replacement Check

The HDD or system board may be faulty. Disassemble the computer following the steps
described in Chapter 4 and perform the following checks:
Check 1
Check 2
Check 3
Check 4
2-22
Downloaded from www.Manualslib.com
Make sure the following connectors have been firmly connected to the HDD,
system board and CPU.
HDD
If any connector is loose or off, reconnect it firmly and return to Procedure 1.
If there is still an error, perform Check 2.
The HDD may be damaged. Replace it with a new one following the
disassembling instructions in Chapter 4. If the problem persists, perform
Check 3.
The System board may be damaged. Replace it with a new one following the
disassembling instructions in Chapter 4. If the problem persists, perform
Check 4.
The CPU may be damaged. Replace it with a new one following the
disassembling instructions in Chapter 4.
manuals search engine
System board
TECRA S1 Maintenance Manual
2.6 2.5-inch HDD
CPU