Rear View - Lenovo ThinkServer TD200x Hardware Maintenance Manual

Rear view

The following illustration shows the connectors and LEDs on the rear of the server.
1
USB 1
2
USB 2
3
USB 3
4
USB 4
5
Ethernet 10/100/1000
6
Power-cord connector
USB 1-4 connectors: Connect a USB device, such as USB mouse or keyboard, to any of these connectors.
Ethernet 10/100/1000 connector: Use these connectors to connect the server to a network.
Power-cord connector: Connect the power cord to this connector.
Power-error LED: When the power-error LED is lit, it indicates that the power supply has failed.
dc-power LED: Each hot-swap power supply has a dc-power LED and an ac-power LED. When the
dc-power LED is lit, it indicates that the power supply is supplying adequate dc power to the system.
During typical operation, both the ac and dc-power LEDs are lit. For any other combination of LEDs, see
Power-supply LEDs.
126
ThinkServer TD200x Hardware Maintenance Manual
7
Power-error LED
8
dc-power LED
9
ac-power LED
10
Video connector
11
Serial 1 (COM 1)
12
Systems-management connector