Rear View - Lenovo ThinkSystem SR950 V3 System Configuration Manual

• "Set the network connection for the Lenovo XClarity Controller" on page 55
• "XCC system management port LEDs" on page 37
22 External diagnostics handset connector
Connect the external diagnostics handset to this connector. See "External diagnostics handset" in
ThinkSystem SR950 V3 User Guide or ThinkSystem SR950 V3 Hardware Maintenance Guide for more details.

Rear view

The rear of the server provides access to several components, including the power supplies, PCIe adapters,
serial port, and Ethernet port.
Note: Depending on the configuration, your server might be slightly different from the image.
Figure 5. Rear view
Table 3. Components on the rear view
PCIe slot S5
1
PCIe slot S6
2
PSU S1-S3 (top to bottom)
3
PSU S4-S6 (top to bottom)
4
PCIe slot S7
5
PCIe slot S8
6
PCIe slot P8
7
1 / 2 / 5 / 6 PCIe slot S5-S8
Install PCIe adapters into these PCIe slots. See "Install a PCIe adapter" in ThinkSystem SR950 V3 User
Guide or ThinkSystem SR950 V3 Hardware Maintenance Guide.
PCIe slot P7
8
PSU P4-P6 (top to bottom)
9
PSU P1-P3 (top to bottom)
10
OCP slot
11
PCIe slot P6
12
PCIe slot P5/XCC system management port
13
Chapter 2
.
Server components
17