Table of Contents
Advertisement
Figure 2. Configuration with six 2.5-inch SAS/SATA/NVMe SSDs
Table 4. Components in the front view of the ThinkSystem SD535 V3 node
2.5-inch drive bays
1
Drive activity LED
2
Drive status LED
3
1
2.5-inch drive bays
• Install 2.5-inch drives or drive fillers to these bays (see "Drive replacement" in the User Guide or Hardware
Maintenance Guide).
• For more information about the drive LEDs, see
2
&
3
Drive activity LED & Drive status LED
For more information about the drive activity and status LEDs, see
4
Front operator panel buttons and LEDs
For more information about the front operator panel buttons and LEDs, see
page
28.
5
Pull-out information tab
This tab contains below information:
• Network information such as MAC address and XCC network access label.
• Drive bay numbers.
For more information about this tab, see
page
43.
Rear view
The following sections show the rear of the D3 Chassis and SD535 V3 node.
Chassis rear view
The following illustrations show the rear view of the ThinkSystem D3 Chassis.
Notes:
ThinkSystem SD535 V3 System Configuration Guide
20
Front operator panel buttons and LEDs
4
Pull-out information tab
5
"Drive LEDs" on page
"Identify the system and access the Lenovo XClarity Controller" on
28.
"Drive LEDs" on page
28.
"Front operator panel LEDs" on
Advertisement
Table of Contents
