Lenovo ThinkServer TD200x Hardware Maintenance Manual page 256

Adapter Properties
Scan Devices
Virtual Disks
Physical Drives
Configuration Wizard
Adapter Selection
Physical View or Logical View
Events
Exit
Creating a storage configuration using the Configuration Wizard
Follow these steps to start create a storage configuration:
1. Click Configuration Wizard to start the wizard.
2. Select a configuration option:
Attention: If you select Clear Configuration or New Configuration, all existing data in the configuration
is deleted. Make a backup copy of any data that you want to keep before selecting these options.
Clear Configuration
New Configuration
Add Configuration
3. Click Next.
4. Select a configuration mode from the following options:
248
ThinkServer TD200x Hardware Maintenance Manual
From this view, you can display and modify the
properties of the SAS adapter that is currently
selected.
From this view, you can re-scan the physical and
virtual disks for any changes in the drive status or
physical configuration.
From this view, you can display and modify the
virtual disk properties, delete virtual disks, initialize
disks, and perform other tasks.
From this view, you can view the physical drive
properties, create hot spare disks, and perform
other tasks.
Select this to start the Configuration Wizard
and create a new storage configuration, clear a
configuration, or add a new configuration.
From this view, you can select a different SAS
adapter. Then, you can view information about the
adapter and the drives connected to it, or create a
new configuration for the adapter.
Select this to toggle between the Physical View and
Logical View.
From this view, you can display the system events
in the Event Information page.
Select this to exit the WebBIOS utility and continue
with the system boot.
Clears the existing configuration.
Clears the existing configuration and lets you
create a new configuration.
Retains the existing storage configuration and
adds new drives to it (this does not cause any
data loss).