Installing The Air Baffle - Lenovo ThinkServer TD200x Hardware Maintenance Manual

Installing the air baffle

To install the air baffle, do the following:
1. With the rear (hinged) part of the air baffle
baffle with the locating holes in the server chassis and fan-cage assembly.
2. Slide the air baffle down into the server
down on the air baffle until the pinch tab clicks into place.
3. Rotate the rear (hinged) part of the air baffle
Note: Make sure that the power-supply cage cables are not caught under the air baffle.
4. Return the power-supply cage to its closed position (see Closing the power-supply cage).
5. Install the hot-swap power supply or power supplies (see Installing a hot-swap power supply).
6. Install and lock the left-side cover.
7. Reconnect the external cables and power cords; then, turn on the attached devices and turn on the
server.
3 lifted up, align the positioning pins on the ends of the air
1 until the positioning pins fit into the locating holes; then, press
2 down to the system board.
.
Chapter 7 Installing optional devices and replacing customer replaceable units
165