Removing The Left-Side Cover - Lenovo ThinkServer TD200x Hardware Maintenance Manual

1
Bezel media door
2
Media door lock
3. Close the bezel (see Closing the bezel).

Removing the left-side cover

Important: Before you install optional hardware, make sure that the server is working correctly. If an
operating system is installed, start the server, and make sure that the operating system starts. If no operating
system is installed, start the server and make sure that a 19990305 error code is displayed, indicating that an
operating system was not found but the server is otherwise working correctly. If the server is not working
correctly, see the Diagnostics for diagnostic information.
1
Cover release latch
2
Lock
3
Left-side cover
To remove the cover, do the following:
1. Read the safety information that begins on page Safety information.
2. If you are planning to view the error LEDs that are on the system board and components, leave the
server connected to power and go directly to step .
152
ThinkServer TD200x Hardware Maintenance Manual