Lenovo ThinkServer TD200x Hardware Maintenance Manual page 60

• Follow the suggested actions in the order in which they are listed in the Action column until the problem is
solved.
• See Parts Listing, TD200x Machine Types 3719, 3821, 3822, and 3823 to determine which components are
customer replaceable units (CRU) and which components are field replaceable units (FRU).
• If an action step is preceded by "(Trained service technician only)," that step must be performed only by
a trained service technician.
IP address of network
interface modified from %1
to %2 by user %3.(%1 =
CIM_IPProtocolEndpoint.IPv4Address;
%2 =
CIM_StaticIPAssignmentSettingData.IPAddress;
%3 = user ID)
IP subnet mask of network
interface modified from %1
to %2 by user %3s.(%1 =
CIM_IPProtocolEndpoint.SubnetMask;
%2 =
CIM_StaticIPAssignmentSettingData.SubnetMask;
%3 = user ID)
IP address of default
gateway modified from %1
to %2 by user %3s.(%1 =
CIM_IPProtocolEndpoint.GatewayIPv4Address;
%2 =
CIM_StaticIPAssignmentSettingData.DefaultGatewayAddress;
%3 = user ID)
OS Watchdog response %1 by
%2.(%1 = Enabled or Disabled; %2
= user ID)
DHCP[%1] failure, no IP address
assigned.(%1 = IP address,
xxx.xxx.xxx.xxx)
Remote Login Successful.
Login ID: %1 from %2 at IP
address %3.(%1 = user ID; %2 =
ValueMap(CIM_ProtocolEndpoint.ProtocolIFType;
%3 = IP address, xxx.xxx.xxx.xxx)
Attempting to %1 server %2 by
user %3.(%1 = Power Up, Power
Down, Power Cycle, or Reset; %2 =
Lenovo_ComputerSystem.ElementName;
%3 = user ID)
Security: Userid: ' had %2 login
failures from WEB client at IP
address %3.(%1 = user ID; %2 =
MaximumSuccessiveLoginFailures
(currently set to 5 in the firmware); %3
= IP address, xxx.xxx.xxx.xxx)
52
ThinkServer TD200x Hardware Maintenance Manual
Info A user has modified the IP
address of the IMM.
Info A user has modified the IP
subnet mask of the IMM.
Info A user has modified the
default gateway IP address
of the IMM.
Info A user has enabled or
disabled an OS Watchdog.
Info A DHCP server has failed to
assign an IP address to the
IMM.
Info A user has successfully
logged in to the IMM.
Info A user has used the IMM to
perform a power function on
the server.
Error A user has exceeded
the maximum number of
unsuccessful login attempts
from a Web browser and has
been prevented from logging
in for the lockout period.
No action; information only.
No action; information only.
No action; information only.
No action; information only.
1. Make sure that the network
cable is connected.
2. Make sure that there is a
DHCP server on the network
that can assign an IP address
to the IMM.
No action; information only.
No action; information only.
1. Make sure that the correct
login ID and password are
being used.
2. Have the system
administrator reset the
login ID or password.