The following illustration shows the cable connectors on the ServeRAID-BR10i controller.
1
ServeRAID-BR10i controller
2
Cable connector for drives 0 - 3
3
Cable connector for drives 4 - 7
The following illustration shows the internal SAS/SATA cable routing and connectors from the ServeRAID
MR10i or ServeRAID MR10is controllers to eight 2.5-inch hard disk drives. The right port on the ServeRAID
MR10i or ServeRAID MR10is controller is connected to the backplane for drives 4-7 and the left port on the
controller is connected to the backplane for drives 0-3.
160
ThinkServer TD200x Hardware Maintenance Manual