Installing The System Board - Lenovo ThinkServer TD200x Hardware Maintenance Manual

• Extender card (see Removing an extender card).
• DIMMs (see Removing a memory module).
• Microprocessors and heat sinks (see Removing a microprocessor and heat sink).
• Battery (see Removing the battery).
Step 11. Rotate the release lever toward the front of the chassis.
Step 12. Slide the system board toward the front of the server to disengage the tabs from the chassis; then,
grasp the handles and carefully lift the system board out of the server.
Step 13. If you are instructed to return the system board, follow all packaging instructions, and use any
packaging materials for shipping that are supplied to you.

Installing the system board

1
Handle
2
Release lever
To install the system board, complete the following steps:
Step 1. Touch the static-protective package that contains the system board to any unpainted metal surface
on the server; then, remove the system board from the package.
Step 2. Hold the system board by the handles and insert the system board into the chassis at an angle;
then, slide it toward the rear of the server.
Note: Make sure that none of the server cables are caught under the system board.
218
ThinkServer TD200x Hardware Maintenance Manual