Previewing With Check Print - Tektronix Z780GN - Phaser 780 Graphics Color Laser Printer Advanced Features And Troubleshooting Manual

2
Advanced Print Features

Previewing with Check Print

10 Phaser 780 Color Laser Printer
Requirements
Plus Feature Set
Enable the feature in the printer's front panel
Select Check Print in the driver software (see page 11).
When printing multiple pages through the driver (either multiple copies of a single
page or a multiple-page file), select Check Print to preview the first page of the job
before proceeding with the remainder of the job; this feature is useful when printing
a large job.
Access to Check Print from the driver is enabled and disabled in the printer's front
panel. You can also set the timeout in the front panel (timeout is the amount of time
the printer waits after sending the first page of a file before it continues with the
remainder of the job).
The factory default for Check Print is "disabled"; the default timeout is 5 minutes.
Follow these instructions to enable Check Print in the front panel, reset the timeout,
and select the option in the printer driver.
Enable Check Print and reset the timeout
1.
At the front panel Ready message, press Select.
2.
Press the right arrow button until the display reads Printer Defaults.
3.
Press Menu. Then press the right arrow button until the following message
appears:
Printer Defaults
Check Print: Off
4.
Press Menu; the following message appears, where the asterisk (*) indicates
the current setting:
Check Print
*Off Select
5. Press the right arrow button; the following message appears:
Check Print
On Select
6.
Press Select.
7.
Change the timeout (the amount of time the printer pauses before
completing the print job): When the front panel displays Printer
Defaults/Check Print Timeout, press Menu.
Menu