Table of Contents
Advertisement
XG Series User's Guide
5.15.1.24 snmp user notify
Function
Available Model
Syntax
Options
Use Mode
Explanation
Default
Sets trap notification permission view.
XG0224 / XG0448 / XG2600
snmp user [<number>] notify <access> [<view_number>]
<number>
• User ID
User ID expressed as a base 10 value from 0 to 7. Default is 0.
<access>
Indicates trap notification permission view.
• all
Permission is granted for all supported trap notifications.
• none
Trap notification permission is not granted.
• view
Use the MIB view information set with the
<view_number>
Specifies the
"snmp view subtree"
10 value from 0 to 7. The view ID can only be set when view is specified for the <access>
option.
Configuration mode (admin class)
Sets trap notification permission view in SNMPv3.
If a
"snmp view subtree"
command definition corresponding to the view ID set does not
exist, trap notification permission is not granted.
If unset, trap notification permission is granted on all supported trap notifications.
snmp user <number> notify all
"snmp view subtree"
command's MIB view ID number, expressed as a base
277
Chapter 5 Command Reference
command.
Device Information Settings
Advertisement
Table of Contents
