XG Series User's Guide
5.11 Loop Detection Information Settings
This section explains about Loop Detection information settings.
5.11.1
Loop Detection Information
This section explains about the commands related to Loop Detection information.
5.11.1.1 loopdetect use
Function
Available Model
Syntax
Options
Use Mode
Explanation
Default
Set the Loop Detection function.
XG0224 / XG0448 / XG2600
loopdetect use <mode>
<mode>
• on
Enable the Loop Detection function.
• off
Disable the Loop Detection function.
Configuration mode (admin class)
Set whether or not to enable the loop detection function.
It is assumed that the loop detection function is disabled.
loopdetect use off
230
Chapter 5 Command Reference
Loop Detection Information Settings