Clear Igmpsnoop Group - Fujitsu XG Series User Manual

XG Series User's Guide

5.33.2.2 clear igmpsnoop group

Function
Available Model
Syntax
Options
Use Mode
Explanation
Execution Example
Caution
Clear the IGMP snooping entries.
XG0224 / XG0448 / XG2600
clear igmpsnoop group <vid> <address>
<vid>
Specify an ID of VLAN with the entries to clear. If "all" is specified, all VLANs are
selected.
<address>
Specify an address to clear the entry.
Operation mode (admin class)
Configuration mode (admin class)
Clear listener information held by IGMP snooping.
# clear igmpsnoop group 2048 01:00:5e:01:81:19
#
Specify "all" or the MAC address whose entry is to be cleared. If "all" is specified, then all
group addresses other than the group address entries in the range 01:00:5e:00:00:00 - ff
will be cleared. If a particular MAC address is specified, the all group address entries
using the specified address will be cleared. This means that all entries with the same
lower bytes in their group address will be cleared. To calculate the MAC address, take the
group address (A.B.C.D), convert the lower 23bits (B'.C.D) to 2-digit hexadecimal
numbers, and prepend "01:00:5e" to get "01:00:5e:B':C:D".
For example, if you would like to clear 224.129.1.1 (0e.81.01.01), please set
01:00:5e:01:01:01 as MAC address.
You can't clear 01:00:5e:00:00:01-01:00:5e:00:00:ff for 224.0.0.0-224.0.0.255.
505
IGMP Snooping Counter, Log, Statistics, and Status Display and Clear
Chapter 5 Command Reference
Operation Commands