Backup Standby - Fujitsu XG Series User Manual

XG Series User's Guide

5.1.1.31 backup standby

Function
Available Model
Syntax
Options
Use Mode
Explanation
Caution
Default
Set the standby status of backup ports.
XG0224 / XG0448 / XG2600
backup <group> standby <mode>
<group>
• Backup group number
Set a backup group number with a decimal number.
Range
1 to 13 XG0224
1 to 26 XG0448
1 to 13 XG2600
<mode>
Set the standby status of backup ports.
• online
The backup port in standby status does not go offline.
• offline
The backup port in standby status goes offline.
Configuration mode (admin class)
Set the standby status of backup ports.
If the standby state is specified to offline, the backup port in standby status goes offline.
The offline port is in the same state as when the
control is executed.
If the currently operating backup port goes down, the offline port is released.
The released port is switched unless it is still offline due to another function or has an
error.
• When the backup port selection method is set as a "master", backup priority port is not
offline even it is set to be offline in standby status.
If the backup priority port must be offline, set the backup port selection method as
"earlier".
• When backup port is set to be offline in standby status, offline port cannot be released
automatically by any function other than backup port function. The same is true for the
offline port set by "offline"
It is assumed that "online" has been specified as the standby status of backup ports.
backup <group> standby online
"offline"
command.
121
Chapter 5 Command Reference
Model
command for the Ethernet port
Port Information Settings