Show Ether Queue - Fujitsu XG Series User Manual

XG Series User's Guide

5.20.1.6 show ether queue

Function
Available Model
Syntax
Options
Use Mode
Explanation
Caution
Display the number of packets placed in the COS queue of Ethernet physical ports.
XG0224 / XG0448 / XG2600
show ether queue [line <line>]
N/A
Display the number of packets placed in the COS queue of all ports.
line <line>
Display the number of packets placed in the COS queue of the specified port.
No information is displayed if the specified port number is invalid.
Range
1 to 26 XG0224
1 to 52, c1 to c4 XG0448
1 to 26 XG2600
When specifying multiple port numbers, separate them with commas (,).
When specifying sequential numbers, separate them with hyphens (-). (Example: "1-8")
Operation mode (user class/admin class)
Configuration mode (admin class)
Display the number of packets remaining in the COS queue of Ethernet physical ports.
If the "line" option is specified, the information of the target port is displayed.
The number of packets remaining in the COS queue is cleared if this device is restarted.
412
Ethernet Counter, Log, Statistics, and Status Display and Clear Operation
Chapter 5 Command Reference
Model
Commands