Ether Startup - Fujitsu XG Series User Manual

XG Series User's Guide

5.1.1.14 ether startup

Function
Available Model
Syntax
Options
Use Mode
Explanation
Caution
Default
Set the offline status when it is started up.
XG0224 / XG0448 / XG2600
ether <number> startup <mode>
<number>
• ether port number
Set a port number to use with a decimal value.
When setting multiple port numbers, separate them with commas (,).
When setting sequential numbers, separate them with hyphens (-). (Example: "1-8")
<mode>
• online
The port starts operation in the online state during device startup or during dynamic
definition reflection.
• offline
The port starts operation in the offline state during device startup or during dynamic
definition reflection. Also, wait for an offline release instruction from operator.
Configuration mode (admin class)
Set the port in offline state during device startup or during reflection of dynamic
definitions.
During device startup or during change of dynamic definitions, the relationship between
the Ethernet port state and the port offline state is as follows.
Ether port state during device startup or dynamic definitions change
<mode>
Linkup possible
online Linkup or Communication
possible
offline Communication
impossible
entering offline state
If ports are offline, release them with the
It is assumed that forcible offline processing to the port is not performed during device
startup or during reflection of dynamic definitions.
ether startup online
Linkup impossible
Linkdown or
Communication
impossible
Communication
impossible
entering offline state
"online" command with port releasing.
104
Chapter 5 Command Reference
Port offline
Communication
impossible
staying in offline state
Communication
impossible
staying in offline state
Port Information Settings