Show Ether Statistics - Fujitsu XG Series User Manual

XG Series User's Guide

5.20.1.3 show ether statistics

Function
Available Model
Syntax
Options
Use Mode
Explanation
Caution
Display the statistics of Ethernet physical ports.
XG0224 / XG0448 / XG2600
show ether statistics [line <line>] [detail]
N/A
Display all the statistics.
line <line>
• Display the statistics of the specified port.
No statistics are displayed if the specified port number is invalid.
The management port is specified by "m1".
The port for an internal connection that ties each switch device is specified by "C1".
Range
1 to 26 XG0224
1 to 52, c1 to c4 XG0448
1 to 26,m1 XG02600
When specifying multiple port numbers, separate them with commas (,).
The specification of the port simultaneously other than m1 and m1 are also possible.
The specification of the port simultaneously other than c1 to c4 and c1 to c4 are also
possible.
When specifying sequential numbers, separate them with hyphens (-). (Example: "1-8")
detail
Display the statistics of the Ethernet ports together with related detailed information.
Even if detail is specified, the content of the display is not added for the m1 port.
Operation mode (user class/admin class)
Configuration mode (admin class)
Display the statistics of the Ethernet physical port.
Specifying only the "line" option will display the statistics of the target port.
The relation between the port number and the switch device of XG0448 is shown.
Range
1 to 24,51,52 switch device 0
25 to 50 switch device 1
Connected port between switch devices is called an "internal connection port".
The relation between the internal connected port number and the switch device is shown.
Range
c1,c2 switch device 0
c3,c4 switch device 1
C1 is connected with C3. C2 is connected with c4.
The statistics are cleared if this device is restarted.
switch device
switch device
389
Ethernet Counter, Log, Statistics, and Status Display and Clear Operation
Chapter 5 Command Reference
Model
Commands