Schedule Syslog - Fujitsu XG Series User Manual

XG Series User's Guide
Use Mode
Explanation
Default

5.15.6.2 schedule syslog

Function
Available Model
Syntax
Options
Use Mode
Explanation
Default
Configuration mode (admin class)
Set the system schedule.
Based on the schedule, the command is executed at the specified time.
It is assumed that no schedule information is set.
Set the system log in the system schedule.
XG0224 / XG0448 / XG2600
schedule <number> syslog <syslog>
<number>
Specify the schedule definition.
• Schedule definition number
Specify a schedule definition number with a decimal value from 0 to 19.
• any
Define by using unused schedule definition number.
<syslog>
• yes
Specify it when outputting command execution using the system log.
• no
Specify it when outputting command execution without using the system log.
Configuration mode (admin class)
Specify whether or not to write a message, which was output by the command to be
activated in the schedule, to the system log.
This command is enabled only when the command activated in the schedule is specified.
It is assumed that no data is output to system log at a command execution.
schedule <number> syslog no
298
Chapter 5 Command Reference
Device Information Settings