Table of Contents
Advertisement
XG Series User's Guide
Display of spanning tree information of the root bridge
# show spanning-tree root
Root ID
Priority
Address
Cost
Port
Hello Time 2 sec
----------------
(5)
1)
Bridge priority
The priority of the root bridge is displayed.
2)
MAC address
The MAC address of the root bridge is displayed.
3)
Root path cost
The path cost to the root bridge is displayed.
4)
Root port
The interface name of the root port is displayed.
If this device operates as the root bridge, the following is displayed.
Port
0 (This bridge is the root)
5)
Configuration BPDU send interval
The configuration BPDU send interval (in seconds) is displayed.
6)
Maximum wait time (in seconds)
The maximum wait time (in seconds) of configuration BPDUs is displayed.
7)
Maximum forwarding delay time (in seconds)
The maximum forwarding delay time (in seconds) is displayed.
Display of spanning tree bridge information of this device
# show spanning-tree bridge
Bridge ID
Priority
Address
Hello Time 2 sec
----------------
(3)
BPDU Mode off
-------------
(6)
STP Mode stp
------------
(7)
1)
Bridge priority
The bridge priority used for the bridge identifier of this device is displayed.
2)
MAC address
The MAC address used for the bridge identifier of this device is displayed.
3)
Configuration BPDU send interval
The configuration BPDU send interval (in seconds) is displayed.
4)
Maximum wait time
The maximum wait time (in seconds) of configuration BPDUs is displayed.
5)
Maximum forwarding delay time
The maximum forwarding delay time (in seconds) is displayed.
32768
00:00:e2:08:57:89
200000
1 (eth1)
Max Age 20 sec
Forward Delay 15 sec
--------------
--------------------
(6)
32768
00:0b:5d:89:00:aa
Max Age 20 sec
Forward Delay 15 sec
--------------
--------------------
(4)
457
Bridge Counter, Log, Statistics, and Status Display and Clear Operation
Chapter 5 Command Reference
---(1)
---(2)
---(3)
---(4)
(7)
---(1)
---(2)
(5)
Commands
Advertisement
Table of Contents
