Table of Contents
Advertisement
XG Series User's Guide
Caution
Default
If information is displayed, the following prompt will appear.
MORE(line 1-22/515 lines, 1428/33473 bytes, 4%):
- -- ---
a b
c
If it cannot be displayed backward, the following prompt will appear.
MORE(line 1-22 lines):
- --
a b
Description:
a: Top line number on screen
b: Bottom line number on screen
c: Total number of lines
d: Number of displayed bytes
e: Total number of bytes
f: Ratio of total number of bytes to number of displayed bytes (d / e x 100)
When a help is displayed, the prompt below will appear following the help. Press the
[RETURN] key. Pressing [CTRL+C] will halt the display of command output.
MORE: help (press RETURN)
When the allowable number of screen lines is less than 3, pager function will not work. In
addition, when the allowable number of screen columns is less than character string
prompt results in a picture distortion.
This command is an operation command; however, the contents specified in the admin
class can be saved as the configuration by executing the
command setting can be deleted using the
The contents set in the user class are discarded at logout or execution of the
command, and they cannot be saved.
It is assumed that the pager function is not used.
terminal pager disable
---- -----
-
d
e
"delete"
command in the configuration mode.
339
Chapter 5 Command Reference
f
"save"
command. This
"admin"
Mode and Terminal Operation Commands
Advertisement
Table of Contents
