Ether Stp Domain Cost - Fujitsu XG Series User Manual

XG Series User's Guide
5.1.3.2

ether stp domain cost

Function
Available Model
Syntax
Options
Use Mode
Explanation
Caution
Default
Set the path cost.
XG0224 / XG0448 / XG2600
ether <number> stp domain <instance-id> cost {auto|<path_cost>}
<number>
• ether port number
Set a port number to use with a decimal value.
When setting multiple port numbers, separate them with commas (,).
When setting sequential numbers, separate them with hyphens (-). (Example: "1-8")
<instance-id>
• STP instance ID number
Specify a decimal value from 0 to 15.
For non-MSTP operation mode, entering a value from 1 to 15 makes it invalid, although
the allowable range is set with a value from 0 to 15.
auto
Determine the cost automatically.
<path_cost>
• Path cost
Set the path cost with a decimal value from 1 to 200000000.
Configuration mode (admin class)
Set a path cost of the STP port.
The cost specified by the instance ID 1 to 15 is valid only when the device is in the MSTP
operation mode (stp mode mstp), but the set value is ignored when the device is in the
non-MSTP operation mode.
It is assumed that automatic setting is used for the ether port path cost.
ether <number> stp domain 0 cost auto
125
Chapter 5 Command Reference
Port Information Settings