Fujitsu XG Series User Manual page 545

XG Series User's Guide
Type
ACL
AAA
Device
Login banner
acl
aaa
snmp
syslog
time
proxydns
host
password format
password admin set
password user set
password aaa
password authtype
schedule
resource
watchdog service
consoleinfo
telnetinfo
mflag
dumpswitch
sysname
serverinfo
login banner telnet
login banner ftp
login banner ssh
login banner description
(0)
The settings are enabled immediately after the command has been executed.
(1)
Only the relevant function is stopped or restarted.
(1)-1
In addition to operation (1), the relevant route is added or deleted with the route
change for this device and the neighboring routers.
(2)
The communication via the relevant logical interface is interrupted briefly.
(3)
The relevant Ethernet port is linked down or linked up.
(3)-LA
If changed from "static" to "passive" or "active" or vice versa, the relevant Ethernet
port is linked down or linked up.
If changed from "passive" to "active" or vice versa, the operation is the same as (1).
(3)-1
If changed from "online" to "offline", the relevant Ethernet port is linked down or
linked up.
If changed from "offline" to "online", the operation is the same as (1).
(4)
To enable the settings, the device needs to be restarted (or reset).
Command Name
545
Chapter 5 Command Reference
Effect of "commit"
(6)*6:XG2600
(1):XG0224/XG0448
(1)
(1)
(1)
(1)
(1)
(1)
(0)
(0)
(0)
(1)
(1)
(1)
(4):XG0224/XG0448
(4)
(1)
(1)
(1)
(1):XG0224/XG0448
(4)
(1)
(1)
(1)
(1)
(1)
Effect by "commit" Command Execution