Serverinfo Ftp Filter Move; Serverinfo Ftp Filter Default - Fujitsu XG Series User Manual

XG Series User's Guide

5.15.8.11 serverinfo ftp filter move

Function
Available Model
Syntax
Options
Use Mode
Explanation

5.15.8.12 serverinfo ftp filter default

Function
Available Model
Syntax
Options
Use Mode
Explanation
Default
Change the priority of the application filter for the FTP server function.
XG0224 / XG0448 / XG2600
serverinfo ftp filter move <count> <new_count>
<count>
• Target filtering definition number
Specify a filtering definition number of which the priority is to be changed.
<new_count>
• Destination filtering definition number
Specify a new priority for <count> with a decimal value from 0 to 29.
If any definition with the same definition number exists, it will be inserted before the
existing one.
Configuration mode (admin class)
Change the priority of the application filter for the FTP server function.
Set the default operation of the application filter for the FTP server function.
XG0224 / XG0448 / XG2600
serverinfo ftp filter default <action>
<action>
Specify how to handle a packet that did not match any application filter table for the FTP
server function.
• accept
Transmit the relevant packet.
• reject
Block the relevant packet.
Configuration mode (admin class)
Set how to handle a packet that did not match any application filter table for the FTP
server function.
A packet that did not match any application filter table is transmitted.
serverinfo ftp filter default accept
306
Chapter 5 Command Reference
Device Information Settings