Show Nettime Statistics - Fujitsu XG Series User Manual

XG Series User's Guide

5.36.1.2 show nettime statistics

Function
Available Model
Syntax
Options
Use Mode
Explanation
Caution
Execution Example
Display the statistics with the NETTIME (time/sntp) function.
XG0224 / XG0448 / XG2600
show nettime statistics [<mode> [<protocol>]]
N/A
Display all the currently operating device information.
<mode>
Specify the display mode.
• server
Display the information of the server function (the clock data provider).
• client
Display the information of the client function (the clock data receiver).
<protocol>
Specify the protocol to display.
• time
Display the TIME protocol information.
• sntp
Display the simple NTP protocol information.
Operation mode (user class/admin class)
Configuration mode (admin class)
Display the NETTIME (time/sntp) statistics.
The time acquisition from this product by
NETTIME (time/sntp) statistics.
The following gives an example of a command execution with each option.
<mode> <protocol>
Only the active protocol in the specified mode is displayed.
# show nettime statistics client time
NETTIME client statistics information:
[time tcp]
0 request transmission error
0 transmitted synchronized request
0 received response
0 received invalid packet
0 received clock not synchronized
0 local clock updated
#
"rdate" command is not included in the
510
NETTIME (time/sntp) Server and Client Statistics Display and Clear
Chapter 5 Command Reference
Operation Commands