Table of Contents
Advertisement
XG Series User's Guide
5.17.2.6 terminal bell
Function
Available Model
Syntax
Options
Use Mode
Explanation
Caution
Default
Set the bell function to sound in the case of an operation error.
XG0224 / XG0448 / XG2600
terminal bell {enable|disable}
enable
Sound a terminal bell in the case of an operation error.
disable
Do not sound a terminal bell in the case of an operation error.
Operation mode (user class/admin class)
Configuration mode (admin class)
Set whether or not to sound the terminal bell when:
• an attempt has been made to enter characters over the maximum number (1022
characters);
• data has been pasted over the maximum number of characters (1022 characters); or
• no implementation candidate has been found.
This command is an operation command; however, the contents specified in the admin
class can be saved as the configuration by executing the
command setting can be deleted using the
The contents set in the user class are discarded at logout or execution of the
command, and they cannot be saved.
It is assumed that the terminal bell is sounded.
terminal bell enable
"delete"
command in the configuration mode.
343
Chapter 5 Command Reference
"save"
command. This
"admin"
Mode and Terminal Operation Commands
Advertisement
Table of Contents
