Commit Try Time - Fujitsu XG Series User Manual

XG Series User's Guide

5.19.3.4 commit try time

Function
Available Model
Syntax
Options
Use Mode
Explanation
Caution
Reference
Message
Execution Example
Try to commit (dynamically activate) the candidate config, or re-commit the startup-config
if the try time period expires.
XG0224 / XG0448 / XG2600
commit try time <time>
<time>
Specify a time period (from 1m to 24h) until retrieving the startup-config.
The unit shall be d (day), h (hour), or m (minute).
Configuration mode (admin class)
Apply the configuration that was set or changed with the configuration command, without
device restart, and retrieve the startup-config in the specified time.
During commit try time period the following cannot be executed:
•
"commit"
• commit try time
•
"save"
If you want to execute these commands, please cancel retrieving the startup-config,
using "commit try cancel"
When the configuration is retrieved, complete the cancellation with this command
sequence:
load startup-config
commit
If the startup-config (config0 or config1) is not same the configuration before editing for
try, Old configuration would be lost.
"5.48 Effect by "commit" Command Execution" (pg.543)
<ERROR> Need to do reset after execute the save command.
Since "commit try time" command already working, it cannot be applied.
Execute after canceling retrieving the startup-config by the
<ERROR> Waiting switch-back to old configuration
An unallowable configuration was created and cannot be applied.
Execute the "reset" command after the
<WARNING> The candidate-config is not changed.
No configuration is added or changed.
It is not necessary to execute the commit command.
# commit try time 10m commit
#
command.
"save" command to restart the device.
376
Configuration Display, Delete and Operation Commands
Chapter 5 Command Reference
"commit try cancel" command.