Rmon - Fujitsu XG Series User Manual

XG Series User's Guide
XG2600(config)# snmp user 0 read view 0
XG2600(config)# snmp user 0 notify view 0
XG2600(config)# commit
XG2600(config)# save
XG2600(config)# exit
4.9.3

RMON

Remote Monitoring (RMON) is a function provided to monitor communications over a network, such as traffic and errors.
RMON, used in conjunction with the SNMP agent, allows the remote monitoring of traffic on a LAN segment.
The device supports 2 RMON groups (Statistics, History).
• Statistics group
Collects traffic statistics for each port.
• History group
Records traffic statistics for each port at specified time intervals.
To configure RMON, carry out the following procedure in "admin" Operation mode.
XG2600# configure
XG2600(config)#snmp rmon <on|off>
XG2600(config)# commit
XG2600(config)# save
XG2600(config)# exit
Command
Command
Chapter 4 Switch Functions and their Configuration
Set MIB read permission view for SNMP v3.
Set trap notification permission view for SNMP v3.
Apply the configuration.
Save the configuration.
Switch to Operation mode.
Switch to Configuration mode.
Specify whether to enable or disable the RMON function.
Apply the configuration.
Save the configuration.
Switch to Operation mode.
84
Task
Task
Network Management