Table of Contents
Advertisement
XG Series User's Guide
5.17 Mode and Terminal Operation
Commands
This section explains about mode and terminal operation commands.
5.17.1
Mode Operation Commands
This section explains about mode operation commands.
5.17.1.1 admin
Function
Available Model
Syntax
Options
Use Mode
Explanation
Caution
Message
Switch to the admin class.
XG0224 / XG0448 / XG2600
admin
N/A
Operation mode (user class)
Switch from the user class to the admin class.
This command has the same function as the
Before switching, enter the administrator password, when asked.
To return from the admin class to the user class, execute the "exit", "end", "quit", or
command.
The settings of the "terminal" and
administrator mode.
Password:
Enter an administrator password.
<ERROR> Authentication failed
Switching to the admin class was failed due to the incorrect administrator password.
Enter the correct administrator password.
<WARNING> weak admin password: set the password
The administrator password is not set.
Set an administrator password.
<WARNING> weak admin password: contain at least 8 characters
The administrator password is seven or fewer characters in length.
Set an administrator password with eight or more characters.
<WARNING> weak admin password: contain a different kind of character
The administrator password consists of only alphabetic characters or only numeric
characters.
Set an administrator password with alphanumeric characters and symbols mixed.
"su"
command.
"alias"
commands will not be inherited by the
330
Chapter 5 Command Reference
"!"
Mode and Terminal Operation Commands
Advertisement
Table of Contents
