Table of Contents
Advertisement
XG Series User's Guide
5.13.3.5 aaa radius client server-info auth address
Function
Available Model
Syntax
Options
Use Mode
Explanation
Default
Set the IP address of the remote RADIUS authentication server.
XG0224 / XG0448 / XG2600
aaa [<group_id>] radius client server-info auth [<number>] address <address>
<group_id>
• Group ID
Specify a group ID with a serial decimal value.
<number>
• Server definition number
Specify the definition number of the remote device with a decimal value.
The default is 0.
<address>
• Remote IP address
Specify the IPv4 or IPv6 address of the remote RADIUS authentication device.
The allowable range is as follows:
- IPv4
1.0.0.1 to 126.255.255.254
128.0.0.1 to 191.255.255.254
192.0.0.1 to 223.255.255.254
- IPv6
::2 to fe7f:ffff:ffff:ffff:ffff:ffff:ffff:ffff
fec0:: to feff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
Configuration mode (admin class)
Set the IP address of the RADIUS authentication server that communicates with this
device.
Multiple servers cannot be specified.
The IP address of the remote RADIUS authentication device is not set. Be sure to set this
command when using the RADIUS authentication function.
251
Chapter 5 Command Reference
AAA Information Settings
Advertisement
Table of Contents
