Password Admin Set - Fujitsu XG Series User Manual

XG Series User's Guide
Default
5.14.2

password admin set

Function
Available Model
Syntax
Options
Use Mode
Explanation
Caution
Message
If unset, the common setting will be the default.
password format common
Set an administrator password.
XG0224 / XG0448 / XG2600
password admin set [<password> [encrypted]]
<password>
• Password
Specify a password using up to 64 characters from, 0x21,0x23 to 0x3e,0x40 to 0x7e
ASCII set.
• Encrypted password
Specify the encrypted password together with "encrypted" to be displayed with the
"show candidate-config",
Correctly specify the character string displayed in the
running-config", or "show startup-config"
encrypted
• Specify the encrypted password
Specify it when setting the encrypted password in <password>.
Configuration mode (admin class)
Set a password for the administrator to login this device. When changing to the
administrator with the "admin"
command is required.
To make the password secure, it shall be set with eight or more alphanumeric characters
and symbols mixed.
If the <password> option is not set, the password is required interactivery.
This command becomes valid just after it is set.
Entering "admin" for the user name and this password for "password" makes it possible
to login as the admin class and also to use admin-class commands.
Be sure to set an administrator password. When not setting the administrator password,
you can login without entering any password.
When not setting the administrator password, you can't use AAA user information (see
"aaa user id" command) and user information in RADIUS-server.
When setting a password that consists of seven or fewer characters, only alphabetic
characters, or only numeric characters, and also when deleting a setting, the setting and
the deletion are performed, but a warning message will be displayed notifying that the
password is vulnerable.
With the "show candidate-config",
commands, the encrypted password is displayed together with "encrypted".
Password:
The <password> option is not set.
Type the password for administrator interactivery.
"show running-config", or
command.
command, the administrator password set in this
"show running-config", and
258
Chapter 5 Command Reference
"show startup-config" command.
"show candidate-config",
"show startup-config"
Password Information
"show