Serverinfo Ssh Ip6 - Fujitsu XG Series User Manual

XG Series User's Guide

5.15.8.21 serverinfo ssh ip6

Function
Available Model
Syntax
Options
Use Mode
Explanation
Caution
Default
Set the IPv6 SSH login server function
XG0224 / XG0448 / XG2600
serverinfo ssh ip6 <mode>
<mode>
• on
Enable IPv6 SSH login server function
• off
Disable IPv6 SSH login server function
Configuration mode (admin class)
Set whether or not to enable the IPv6 SSH login server function.Setting this command
Off and the "serverinfo sftp ip6"
IPv6 address from the ssh client. Setting this command Off and the
command On will reject a connection request using the IPv6 address from the ssh client
after the password was entered.
Enabling this command generates an SSH host authentication key at device power-on
and execution of the "reset"
minutes for the processing time. ssh connection is enabled after the SSH host
authentication key generation was completed.If this device has been started to enable
this function while all the ssh and sftp functions were Off, it also takes several tens of
seconds to several minutes for the processing time to generate an SSH host
authentication key. Note that other processes may be affected; session monitoring
timeout may occur, for example.
It is assumed that the IPv6 SSH login server function is enabled.
serverinfo ssh ip6 on
command Off will reject a connection request using the
command, and it takes several tens of seconds to several
312
Chapter 5 Command Reference
"serverinfo sftp ip6"
Device Information Settings