Snmp User Notification - Fujitsu XG Series User Manual

XG Series User's Guide

5.15.1.19 snmp user notification

Function
Available Model
Syntax
Options
Use Mode
Explanation
Default
Set a trap notification host address.
XG0224 / XG0448 / XG2600
snmp user [<number>] notification [<addr_number>] <address>
<number>
• User definition number
Specify a user definition number with a decimal value from 0 to 7.
The default is 0.
<addr_number>
• Trap notification host definition number
Specify a trap notification host definition number with a decimal value from 0 to 7.
The default is 0.
<address>
• Trap notification host address
Specify an IP address of the host, which is subject to trap notification, in the
XXX.XXX.XXX.XXX format, where "XXX" indicates a 3-digit decimal value.
The allowable range is as follows:
1.0.0.1 to 126.255.255.254
128.0.0.1 to 191.255.255.254
192.0.0.1 to 223.255.255.254
Configuration mode (admin class)
Set a trap notification host address under SNMPv3. Up to eight addresses can be
defined for this device, including the ones set in the
It is assumed that no trap notification host address is set.
"snmp user address"
272
Chapter 5 Command Reference
command.
Device Information Settings