NEC NEAX 2000 IPS Reference Manual page 94

Chapter 5 Station Equipment
Call Handling Features
Four Local Soft Key Controls (detail functions are dependent on PBX)
•
Large Message Waiting LED
•
24 Character, 3-Line LCD
•
Built-in Headset Jack Connector
•
Speed Dial/DSS Buttons
•
Programmable Line Keys with 2-Color LED
•
Eight Dedicated Function Keys (Feature, Recall, Conf, Redial, Hold, Transfer, Answer & Speaker)
•
Built-in Half Duplex Hands-free Unit
•
Convergence Features
Two 10/100 full duplex Ethernet ports- One which connects the D
•
Network, the other provides connectivity for a local workstation.
Three types of powering options:
•
Local AC adapter
-
CDP (Cisco Discovery Protocol) power for those infrastructures with an installed base of Cisco
-
gear
Spare pair power across the Ethernet network.
-
Transportable QoS, which follows the user no matter where they log in.
•
Multiple Voice Coding support, which automatically negotiates to a common setting.
•
G.711 providing an international standard for encoding/decoding telephony signals on a 64
-
Kbps Non-compressed channel.
It also supports the compression algorithms G.729A (8Kbps) and G.723.1 (5.3/6.3 Kbps
-
Line Conditions
ITR-8D-3
Max. 328 ft. between Ether/IP-PAD and Router/ Switching Hub
ITR-16D-3
Max. 328 ft. between Ether/IP-PAD and Router/ Switching Hub
ITR-16LD-3
Page 5- 18 NEAX2000 IPS Request For Proposal (RFP) Reference Guide
term
IP to the local Ethernet
).
NDA-24349 Issue 4