NEC NEAX 2000 IPS Reference Manual page 31

Number of PHYSICAL MODULAR CHASSIS
Built-in Router
DTMF Sender
DTMF Receiver
SN716 Desk Console
Attendant Terminal (D
SMDR Interface
PMS Interface
ACD / MIS or OAI Interface
DID Dial Conversion
Call Forwarding-Outside Set
Authorization Code / Forced Account Code / Remote
Access to System(DISA) Code
Message Reminder Set
Name Display / Guest Name Display
Speed Calling-Station (Station Speed Dial) Set
MP built-in SMDR Call Record
Note 1:
Each Modular Chassis has 24 Virtual LT Ports that can only be used to expand the PAD channels from 8 to
32 using the 8IPLA w/24IPLA.
Note 2:
When 8LC card is used, the 4LC w/RGU is required which does not provide Message Waiting indicator.
Note 3: The total number of trunk line and DTI channel shall be 256 or less.
(Each trunk line and DTI channel are required to assign the "Trunk Number" by system data
programming and maximum number of system parameter for "Trunk Number" is 256.)
NEAX2000 IPS Request For Proposal (RFP) Reference Guide
NDA-24349, Issue 4
DM
IPS System Capacity (Cont.)
term
ATT Position)
Chapter 1 Introduction
Capacity Per MC
1 2
Max. 5 cards per MODULAR CHASSIS
Max. 32 circuits per system
16
8
Max. 8 per system
Max. 1 Interface port per system
Max. 1 Interface port per system
Max. 1 Interface port per system
1000
496
3000
1024
512
10000
1280
3
32
Page 1-25