NEC NEAX 2000 IPS Reference Manual page 187

Request for proposal (rfp)
Hide thumbs Also See for NEAX 2000 IPS:
Table of Contents

Advertisement

Security Alarm
This feature provides an indication on the
Attendant Console when a contact closure
occurs.
Set Relocation
This feature enables two stations to be moved
from one location to another without
reprogramming station data at MAT.
Single Digit Dialing
This feature provides the station user the
ability to dial single digit codes to access
certain features while still allowing the same
digit dialed to be used as the first digit of
station number.
SNMP
Simple Network Management Protocol
(SNMP) is a standard protocol for TCP/IP
network management, which enables a
network management application software to
query a management agent (network device
such as router, PC host, and hub) using a
supported MIB (Management Information
Base). The MIB is a database of network
performance information that is stored on the
network devices. The NEAX 2000 IPS can
support the SNMP standard MIB (MIB-II,
defined in IETF RFC 1213) and private MIB
and TRAP. This feature also enables the
network management system (SNMP
manager) to manage the 2000 IPS via
Network Address Translation (NAT).
Software Line Appearance
(Virtual Extensions
This feature permits assignment of circuits
which do not physically exist, to be used as
secondary extensions on Multiline Terminals.
There are a possible 1020 virtuals and can be
calculated by 1020 – number of Multiline
term
term
Terminals (D
/D
available.
NEAX 2000 IPS Request for Proposal (RFP) Reference Guide
NDA-24349, Issue 4
)
IP)=Total Virtuals
Stack Dial
This feature enables a Multiline Terminal or
an Attendant Console to remember the
numbers dialed in the preceding five calls,
including the last number dialed. The stack
dial numbers are sequentially displayed on
the LCD display, thus allowing the station user
to make an outgoing call by selecting the
desired dialed number from the display.
Station Hunting
Three Station Hunting arrangements are
available. Station Hunting - Circular processes
the call no matter which station in the hunt
group is called. Station Hunting - Terminal
initiates a hunt only when the pilot number of
a hunt group is called. Station Hunting -
Secretarial is initiated when a busy station in a
Station Hunting - Circular group or Station
Hunting - Terminal group is reached.
Station Hunting - Circular
When a busy station in a hunt group is called, this
feature permits the call to be processed
automatically through the hunt group in a
preprogrammed order from that station's position
within the hunt group.
Station Hunting - Terminal
When a pilot number is dialed and that number is
busy, sequential Station Hunting will be initiated.
However, if a number other than the pilot number
is dialed and that number is busy, busy tone will
be provided rather than initiate Station Hunting.
Station Hunting - Secretarial
This feature allows assignments to be given to
members of Terminal and Circular Hunting groups
to reroute calls (when their hunting group is all
busy) to a back-up hunting group.
Chapter 9 Descriptions
Page 9- 29

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents