Service Conditions
1. Only one Interface Port can be provided for PMS.
2. The system sends information relating to the following features to the PMS upon request from the
PMS:
Do Not Disturb
Room Cut-off
3. The NEAX 2000 IPS system can support PMS Model-60 via AP00-B or PMS Model 90/120 via
TCP/IP connection.
4. The AP00-B with MRC-E program does not support PMS.
Hardware Required for PMS
Description
SPN-CP24A MP (UA)
SPN-AP00B MRC-C (AP)
PZ-M606-A (ETHER)
RS RVS-4S CA-C
RS NORM-4S CA-A
RS PRT-4S CA-A
PMS Terminal Serial
PMS Terminal over IP
SMDR Terminal
Printer
MODEM
NEAX 2000 IPS Request for Proposal (RFP) Reference Guide
NDA-24349, Issue 4
Qty
1 per system
MP
1 per system
Control card for PMS
1 per system
MP Mounted card One per MP
1 per SMDR/PMS
AP00-VMS, 13.1ft (4.0m)
1 per SMDR/PMS
AP00-MODEM, 13.1ft (4.0m)
1 per Printer
AP00 Printer
1 per system
Model 60 only
1 per system
Model 90/Model 120
1 per system
As required
As required
Chapter 10 System Input/Output (I/O) Interfaces
Remarks
Page 10-11