NEC NEAX 2000 IPS Reference Manual page 41

Installation Hardware
Base/Top Assembly
The Base/Top Assembly includes a Base Unit and a Top Cover for the PIM. One Base/Top Assembly is
required for each PIM stack. The Base Unit also serves as the AC power distribution panel for up to a
four PIM configuration.
Hanger Assembly
The Hanger Assembly is used for Wall-mounting Installation. One set of Hanger Assembly is required
for each PIM.
19 inch Bracket
The 19-inch Bracket is a set of hardware used for 19-inch Rack-mounting Installation. The 19-INCH
RACK BRACKET (A) is installed on both sides of the PIM. One set of 19 inch Bracket (A) is required
for each PIM. The 19-INCH RACK BRACKET (B) is installed at the BASE of stack. One 19-INCH
BRACKET (B) is required for each stack.
If the system is 2 PIM or more configurations with 19-INCH BRACKET (B), one set of 19-INCH
BRACKET (A) is also required for the topmost PIM.
Optional Brackets
The Mounting Bracket is used for Floor Standing Installation. Without Mounting Bracket, 1.1G
shockproof is provided for 1 to 3-module stack and 0.5G shockproof is provided for 4 or more module
stack. To enhance the shockproof capability to 1.1G, one set of Mounting Bracket is required for each 4
or more module stack and attached to the topmost PIM.
The I/F Bracket is used for Floor Standing Installation to joint the neighboring topmost PIM in 6 PIM or
more configurations. One set of I/F Bracket is required for multiple stacks.
The Base Tray Assembly is used for Floor Standing Installation for stationary equipment (UL complied).
One set of Base Tray Assembly is required for each stack.
Abbrev
Top Cover
Base/Top
ASSEM
Hanger Assem
19 inch Bracket
Mounting Bracket
I/F Bracket
Base Tray
NEAX2000 IPS Request For Proposal (RFP) Reference Guide
NDA-24349 Issue 4
Installation Hardware
Description
TOP COVER ASSEM
SN1545 BASERE
HANGER ASSEM (UL)
19 INCH RACK BRACKET (A)
19 INCH RACK BRACKET (B)
MOUNTING BRACKET
I/F BRACKET ASSEM
BASE TRAY ASSEM
Chapter 2 System Architecture
Quantity
1/STACK (BASE ASSEM is local supply)
1/STACK
1/PIM (Wall-mounting Installation)
1/PIM (19 inch Rack-mounting Installation)
1/STACK (19 inch Rack-mounting Installation)
OPTION (1/STACK)
OPTION (1/SYSTEM)
OPTION (1/STACK)
Page 2-7