NEC NEAX 2000 IPS Reference Manual page 385

Service Conditions (Cont.)
c. Call Forwarding - No Answer
a. Station-B continues to ring until the VMS becomes idle regardless of whether the
predetermined time for Call Forwarding - No Answer has elapsed. When the VMS
becomes idle, Station-A is connected to the VMS.
d. Direct access to VMS
a. If station A or outside party accesses the VMS directly, the outside party hears busy tone
and station A can set call back to the VMS.
9. Multiple Call Forwarding to VMS: When the final destination for any combination of Multiple Call
Forwarding is the VMS, calls can be transferred to the VMS. The first forwarded station's number
(forwarded to the VMS) is sent to the VMS. For example, a call is received by Station A, which is
forwarded to Station-B, which is forwarded to Station-C, which is forwarded to VMS. The number of
Station-A is sent to the VMS.
10. Ringing Transfer to an Attendant via the VMS: The system allows the VMS to transfer the station or
outside party to the Attendant and releases before the Attendant answers.
11. When the VMS is recalled, by transferring the call to an unanswered station, the system may be
programmed to send the recalling extension number to the VMS.
12. A maximum of 26 digit extension numbers including DTMF signal after the VMS answered, can be
programmed to a One Touch key of a Multiline Terminal.
NEAX 2000 IPS Request for Proposal (RFP) Reference Guide
NDA-24349, Issue 4
Chapter 19 Voice Messaging Systems
Page 19- 3