NEC NEAX 2000 IPS Reference Manual page 211

MP built-in SMDR on IP
ITEM
Physical Layer
Connection Layer
TCP/IP Protocol
Socket Interface
Transport Protocol
Application Port Number
Number of Connections
Client/Server
Transmission Code
Quasi-normal Restriction Condition
Note 1: The MP card in main site communicates with the SMDR terminal. Therefore, in the communication
settings at SMDR terminal side, set the IP address to connected to the address specified by office data
(CM0B Y=00>00 or CM0B Y=02>03), and application port number shown in the above table.
Note 2: One message is sent each time a request is received from SMDR terminal.
Combinations between SMDR and SMDR Output Format
SMDR
SMDR with AP00
(PN-AP00-B with AP00 program)
SMDR with AP00
(PN-AP00-B with MRCA program
MP built-in SMDR on RS-232C
MP built-in SMDR on IP
X: Available —: Not available
Note: The extended NEAX 2400 IMS format is available by using SC-3168 MRCA program issue 2 or later.
Combinations available at the same time
SMDR
SMDR with AP00
(PN-AP00-B with AP00 program)
SMDR with AP00
(PN-AP00-B with MRCA program
MP built-in SMDR on RS-232C
MP built-in SMDR on IP
X: Available —: Not available
NEAX 2000 IPS Request for Proposal (RFP) Reference Guide
NDA-24349, Issue 4
The Ethernet packet format complies with the DIX standard
Complies with 4.3 BSD socket interface
Former
NEAX 2400 IMS
Format
X
X
)
X
X
Pattern A
X
—
)
X
—
Chapter 10 System Input/Output (I/O) Interfaces
Specifications
Ethernet
ARP, IP, ICMP, UDP, TCP
TCP stream type protocol
60010 (fixed)
1
Client: SMDR terminal
Server: PBX
7-bit ASCII code
1. When conection is closed
2. Status monitoring text
Extended
NEAX 2400 IMS
Format
—
X
NOTE
X
X
Pattern B Pattern C
—
X
X
—
NEAX 2000
Format
X
—
—
—
Pattern D
X —
— X
— —
X X
Page 10-3