NEC NEAX 2000 IPS Reference Manual page 347

Request for proposal (rfp)
Hide thumbs Also See for NEAX 2000 IPS:
Table of Contents

Advertisement

Feature Descriptions
Feature
Analog PBX
Interface
Announcement
- PS No Answer
/Announcement
- PS Out of
Zone
Automatic
Release - Out
of Zone Calls
Call Forwarding
- Not Available
CCIS Interface
Calling Name
Display – PS
Calling Number
Display – PS
DTMF Signal
Sender
Group Call -
Automatic
Conference
(6/10-Party)
NEAX 2000 IPS Request For Proposal (RFP) Reference Guide
NDA-24349, Issue 4
This feature allows the IPS/WCS to be integrated with many types of
PBXs and to activate various PBS services by sending hook flash
signal and DTMF tone.
This feature allows calls to a D
predetermined period of time to be routed to the announcement
notifying the calling party that the D
Announcements can be divided between Announcement - PS No
Answer and Announcement - PS Out of Zone depending on the D
PS III condition.
term
When a D
PS III user engaged in a call moves out of the service
area or enters a radio zone where all the channels are busy and the
communication becomes unavailable, the call will be disconnected
automatically, and the other party receives reorder tone.
When a PS is power off or out of zone, a call directed to the PS is
forwarded to a VMS, and a voice mail message can be recorded to
the VMS and checked from the PS. Also the VMS can page the PS
automatically after the voice mail message is recorded.
This feature allows the IPS/WCS to be integrated with NEC PBXs
with CCIS interface.
Without answering incoming calls or hold calls terminates to the D
PS III, the calling party's name can be confirmed by the indications
on the LCD.
This feature provides a display on the LCD of a D
a call, indicating the station number.
This feature allows a D
to the called party (terminal, voice mail system, etc.) while engaged
in communication.
This feature permits a D
Telephone user within the system to establish a conference among
as many as six or ten parties. From a D
Telephone, a maximum of 9 PSs can be paged simultaneously
except the conference leader. The PSs are assigned to the
simultaneous paging groups as a participant by the system data
beforehand.
Description
term
PS III, which cannot be paged, in a
term
PS III cannot answer.
term
PS III user to send the DTMF signal (tone)
term
term
PS III user, D
term
PS III/D
Chapter 16 Wireless System
term
term
term
PS III receiving
user or Single Line
term
/Single Line
Page 16-9

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents